Fix Computer Won’t Boot To BIOS On Windows 11

how to fix computer won’t boot to BIOS on Windows 11 error

This article will explain how to fix computer won’t boot to BIOS on Windows 11 problem by flashing the CMOS?  The BIOS (basic input-output system) is the program that is launched when you turn on your PC. It is present on every motherboard, and each manufacturer has its own BIOS.

A Gigabyte motherboard has a different BIOS than an MSI motherboard. In addition, each manufacturer has a unique method for accessing the BIOS menu.

The BIOS menu can be accessed immediately after the PC boots up, but what if you cannot boot to the BIOS menu?

One of the reasons your PC isn’t loading to the BIOS menu could be that you changed some BIOS settings that aren’t supported by your pc. Another reason is that your UEFI settings have been changed. This issue may also occur as a result of a BIOS update.

There are numerous methods for resolving this problem because various factors can cause it. There is, however, no reason to be concerned or perplexed. Follow the methods outlined below, and you’ll be fine.

How to Fix Computer won’t Boot to BIOS on Windows 11

Here are some solutions to the computer won’t boot to BIOS problem in Windows 11. Check to see if you’re using the correct keyboard shortcut to enter the BIOS menu before proceeding with any of the methods listed.

 

1. Reset CMOS Settings

Use this method only if you have a black screen after updating or changing some BIOS settings. While you have a dedicated graphics processing unit (GPU) or graphics card, disconnect it and connect your monitor to the internal GPU or graphics card in your motherboard or CPU.

If you are using a CPU that lacks a GPU, please arrange for a GPU from a friend or someone you know. Connect that GPU to your motherboard and connect your monitor to the GPU. Turn on your PC to see if you can see anything on your monitor.

If the problem persists after completing these steps, follow the steps listed below. The steps are straightforward, so keep calm and follow them. You’ve got it!

Here are the steps to resetting UEFI settings on Windows 11 to fix the computer that won’t boot to BIOS issue.

• Shut down your PC.

• Remove your PC’s case.

• Locate the CMOS pins. For 20 seconds, place a screwdriver or a metal object between the CMOS pins. In your browser, search for the location of your motherboard’s CMOS pins. Each motherboard is unique. The pins are located on your motherboard under the writing CMOS.

• After you’ve completed the preceding steps, turn on your pc. Check to see if you can see the BIOS menu on your monitor.

If this method did not apply to you or did not work for you, please follow the other procedures listed below in this post.

 

2. Remove and Reconnect CMOS Battery

Only use this method if you see a black screen after changing some BIOS settings or updating your BIOS.

Have you ever noticed that the time on your pc is always correct, even if you reinstall Windows? This occurs because your PC has a battery that keeps track of the time.

The CMOS battery on the motherboard, keeps track of the time. It is effortless to remove and reconnect the CMOS battery, so don’t worry; I know you can do it!

Here are the steps to fix the computer won’t boot to BIOS issue on Windows 11 by removing and reconnecting the CMOS battery:

• Shut down your PC.

• Remove your PC’s case. A silver circular battery will be visible somewhere on your motherboard. The CMOS battery is what you’re looking at.

• Scoop out the battery and leave it disconnected for a minute.

• Turn the CMOS battery and restart your pc. To be extra safe, connect your internal GPU or graphics card that came with your CPU to your monitor.

• Turn on the computer and see if you can get to the BIOS menu.

If it did not work for you or did not apply to you, do not worry; alternative methods are provided below.

3. Update your BIOS Firmware

If you can enter Windows 11 but not the BIOS menu, your BIOS firmware is likely outdated.

As previously stated, different motherboard manufacturers will have other BIOS firmware. As a result, you must check your motherboard manufacturer’s most recent BIOS version.

Search for the most recent BIOS update using a browser such as Chrome. If you own an ASUS motherboard, you will search for an ASUS BIOS update.

Assume you’re using the Gigabyte H310-M motherboard. As a result, you will search for a BIOS update for this specific motherboard model.

After downloading the update, follow the instructions on the website or watch a YouTube video, but remember your motherboard’s manufacturer and model in mind.

If you followed the guide lines, you should have updated your BIOS firmware successfully. If this method does not work for you, follow the final procedure listed below.

4. Reboot your PC in Safe Mode 

Rebooting your PC in safe mode will allow you to avoid using many components or apps that may be causing problems for which you cannot enter the BIOS menu.

I’ve included steps below to reboot your pc in safe mode.

Here are the steps to reboot your PC in safe mode to fix the computer won’t boot to BIOS menu issue on Windows 11:

• Press the Start and Power buttons at the same time.

fix the computer wont boot to BIOS menu issue

• Hold down the shift key and select Restart. Your PC will reboot in safe mode.

computer wont boot to BIOS

5. Disconnect all Devices Connected to your Device

A component connected to your device may occasionally result, causing your PC to fail to boot properly. It means that you will not even see the BIOS menu in some cases.

All you have to do is unplug all peripherals, such as the keyboard and mouse, and restart the computer. Check to see if you can get to the BIOS menu.

If you can still enter the BIOS menu, remove your dedicated GPU and try again. Remember to connect your monitor to the motherboard’s internal GPU.

If the problem persists, please follow the other methods listed in this post.

I hope you can boot into the BIOS menu on your PC. Your PC must have no problems with the BIOS menu. I had this problem and was very concerned because I thought my Motherboard had failed! Fortunately, I was able to fix the problem by flashing the CMOS.


You may also Like;

Create a Bootable Pendrive By CMD [MBR + GPT]

Fix a System Thread Exception Not Handled BSOD

How to Download Windows 10 ISO Without The Media Creation Tool

You May Also Like

About the Author: Editorial Staff

Leave a Reply

Your email address will not be published. Required fields are marked *