Fix Laptop Plugged In But Not Charging

In this article we will discuss how to fix laptop plugged in but not charging issue. If the battery level on your laptop falls below 20%, it’s time to get the charger and plug it in. But what happens if nothing happens?

Now, we’ll look at what you can do if your laptop isn’t charging despite the charger being plugged in. That way, you won’t have to panic and assume that your laptop has reached the end of its useful life.

Recheck The Connection

Before you do anything, double-check that your laptop’s charger is plugged in. If you’re in a hurry, you might make this mistake.

Rather than reacting immediately, check to see if your laptop’s charger is connected to your laptop. Then, check to see if the outlet you used to plug in your charger is still operational. Also read the article How to speed up a Windows Laptop

Remove The Battery

If your laptop is plugged in but still not charging, the battery could be the problem. If so, find out about its credibility.

Take it out and press (and hold) the power button for about 15 seconds if it’s removable. This will deplete the remaining power in your laptop.

Then connect your laptop’s power cable and turn on the device. Make sure the laptop battery is however out of the picture as you do this.

You can tell if something is wrong with your power adapter using this setup. If your laptop boots up correctly, it means your power adapter is also operational. As a result, the issue is with your battery.

You may have a faulty battery. What is the solution? Replace the battery! This solution is also available for Mac users. However, your laptop (like most Macs) may not have a visible compartment for the battery on the bottom. In this case, you’ll need to figure out how to open your laptop safely and remove the battery.

Use Updated Drivers

If the issue isn’t with your battery, it could be with your drivers. To begin, press the Windows key and select Control Panel.

Choose Hardware and Sound.

Select Device Manager from the Devices and Printers menu.

Proceed to the Microsoft AC Adapter and Right-click it and choose Update Driver.

Now click on Microsoft ACPI-Compliant Control Method Battery. Right-click on it and also select Update driver.

After you’ve completed the updates, restart your laptop and plug in your charger. It should be all right now. Otherwise, go to the manufacturer’s website to download the drivers. Make assured you go to the official website and download the most recent versions of the drivers. Also read How to Fix Windows 10 Taskbar Not Working

Check Power & Sleep Settings

The issue could also be with your settings. Here’s what you need to do to test this on a Windows 10 device.

Launch Settings by pressing the Windows key.

Choose System.

And then select the Power & sleep category.

Open Additional power settings from the Related settings menu.

Select Change plan settings from the drop-down menu.

Then click on System Preferences and open Energy Saver

Then ensure that the appropriate settings are used.

To make any changes to the settings, click Save changes.

You can also access this if you have a Mac.
To begin, navigate to System Preferences and select Energy Saver.

Apply the appropriate settings there.

Seek Outside Help

If none of the above mentioned solutions worked, it’s time to seek professional help. Inform them of your problem, and don’t forget to include the model number of your laptop.

It’s most likely a hardware problem at this point. Either the laptop power adapter is faulty, or the computer’s power port is no longer operational. If you have access to a spare adapter, it is best to rule out the power adapter first.

The issue may be specific to your laptop. And if that’s the case, an experienced tech support representative can assist you.