In this guide, you will realize how to fix Windows 10/11 update error 0x80080008? Because Windows Updates are now part of the Windows life cycle, most users will benefit. However, if you’re experiencing problems installing an update and see the Error 0x80080008 warning, it’s time to launch the update troubleshooter, restart BITS, and scan your hard drive for errors. The article contains additional information.
We’ve all experienced problems with Windows 10 updates. But unfortunately, it is most likely the most common bug that Windows 10 users encounter regularly.
Each of those annoying concerns is followed by an identification code to make things easier. Unfortunately, the error code 0x80080008 is one of those that are common and recurrent.
This error number is prompted when your update is stuck, or some update files are not correctly downloaded and installed.
But don’t upset; we have a few workarounds that would really fix your problem if it annoys you.
Variations of the Windows update error 0x80080008
The update error 0x80080008 will prevent you from downloading the most recent updates. In that vein, here are some other concerns that users have reported:
• 0x80080008 Windows Server 2016: This issue was reported by a large number of Windows Server 2016 users. Although our solutions are mainly for Windows 10, some of them should also apply to Windows Server.
• Windows update failed: This is a Windows Update error, and updates will stop working as a result. However, you should fix the problem by disabling your antivirus software or manually downloading the update.
How to fix Windows Update Error 0x80080008
1. Perform SFC and DISM scans
If you constantly receive update error 0x80080008 on your PC, the issue could be with your installation. This error could be caused by a damaged or corrupted Windows installation.
However, by running an SFC scan, you can easily fix the problem.
To do so, follow the following steps:
1. Right-click to open the Start menu.
2. Select Command Prompt (Admin).
3. Type sfc/scannow onto the command line.
4. The procedure will look for and fix corrupted files.
This tool proved helpful in a variety of scenarios. However, if the corrupted files are not the source of the problem, you may wish to attempt other workarounds.
If SFC scan does not fix the problem, or if you cannot run SFC scan at all, the next step is to run DISM scan. To do so, follow these steps:
1. Run Command Prompt as an administrator.
2. On the command line, use the following command: DISM.exe /Online /Cleanup-image /Restorehealth in shown in the picture below.
3. If the DISM cannot locate files online, try using your installation USB or DVD. Insert the media and enter the following command:
DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess
4. Replace the “C:RepairSourceWindows” path with the path to your DVD or USB.
When the scan process is completed, check to see if the problem is still present. If you could not run SFC scan earlier, try it again after DISM scan to see if that resolves the issue.
2. Restart any Windows Update components that are currently running
According to users, you may occasionally encounter Update error 0x80080008 due to Windows Update components.
To fix the problem, you must restart Windows Update components.
You can accomplish this manually, but it can be time-consuming, so it’s usually easier to utilize Command Prompt.
To use Command Prompt (cmd) to reset Windows Update components, do the following:
1. Run Command Prompt as administrator.
2. Run the following commands:
After executing these commands, the issue should be resolved, and you should be able to download the updates again.
Manually running these commands can be time-consuming.
You can develop a Windows Updates reset script and run it to automatically reset the relevant services if you wish to reset Windows Update components automatically.
3. Check your antivirus software
According to users, Update error 0x80080008 can happen due to problems with your antivirus.
It is advised that you disable various antivirus functions and see if this helps to repair the issue.
If it doesn’t work, you may have to disable your antivirus fully before running the update.
If the issue persists, your next step should be to uninstall your antivirus entirely.
Even if you opt to uninstall your antivirus software, your computer should still be secured by Windows Defender, so you won’t have to worry about your security.
If deleting the antivirus resolves your problem, exploring switching to a new antivirus solution may be time.
There are many good options available, but the antivirus software for Windows 10 that is best suited to your PC will not cause any problems.
4. Download the update manually
If you continue to receive update error 0x80080008, you may be able to circumvent it by manually downloading and applying the update.
It is a relatively short process that can be accomplished by following the steps below:
1. First, find the KB number of the update you’re attempting to download. You can perform this by going to the Windows Update section of the Windows Control Panel or visiting the Windows Update History website.
2. Once you’ve determined the KB number of the update you find attempting to download, go to the Microsoft Update Catalog website. All you have to do is type the update number into the search field.
3. A list of outcomes will be provided. Find the update corresponding to your system architecture and click the Download button to download it.
4. After downloading the update, run the setup file to install it.
After installing the update, your system will be updated to the most recent version, and the issue will be resolved.
Remember that this approach will not fix the underlying issue; instead, it will allow you to download and install the update to circumvent the problem manually.
5. Restart BITS services
Background Intelligent Transfer Service (BITS) is required for Updates. It may crash and stop working on occasion due to various factors.
You need to restart the service and check if the Update protocol improves.
1. Press the Windows key and the R key simultaneously. For example, enter services.msc in the search type and click Enter.
2. Locate and double-click Background Intelligent Transfer Service (BITS) to view its properties.
3. If the service isn’t already running, click the Start button.
4. Select the Recovery tab and ensure that the first and second failures are set to Restart service.
5. Confirm your choice and check for updates.
For some users, this is sufficient. However, if you are still stimulated with the error, proceed to the following solution.
6. Enter Safe Boot mode
In rare situations, background programs and associated procedures can stifle or even prevent an update. So, to avoid a potential conflict, consider modifying your services and startup.
1. Press Windows Key + R to open the Run dialogue box and type msconfig. Now, either click OK or press Enter.
2. check the Services tab and uncheck the item labeled Hide all Microsoft services. Then click Disable All, followed by Apply.
3. Go to the Startup tab and select Open Task Manager.
4. Deactivate each Startup program individually.
5. Restart your computer and attempt updating again.
Following this workaround, you should find and download available updates.
7. Perform out an in-place upgrade
According to users, the only method to fix this problem is to perform an in-place upgrade.
If you’re familiar, an in-place upgrade forces Windows 10 to install the most recent version while preserving all of your files and applications.
You must do the following to perform an in-place upgrade:
1. Install and run Media Creation Tool.
2. Choose Upgrade this PC Now and then click Next.
3. Wait as the setup creates the required files.
4. Now, click Next after selecting Download and install updates (recommended).
5. Allow time for the updates to download.
6. Follow the on-screen directions until you reach the Ready to install screen. Change what you want to keep by clicking on Change what you want to keep.
7. Click Next after selecting Keep personal files and programs.
8. To complete the installation, follow the instructions on the screen.
Your Windows will be updated to the most recent version when the process is complete, and the problem should be resolved permanently. Done.
Remember that the workarounds described in this article can be used for various errors, not simply the one we discussed today. If you have any questions or recommendations, please leave them in the comments below.
1. What exactly is Error 0x80080008?
Users are unable to check for new updates because of the 0x80080008 error. However, it frequently occurs due to a previously unsuccessful download or a cache problem and can be resolved using this advice.
2. How do I fix a Windows 10 update error?
It should be noted you have at least 20% of your overall disc space available. Then, to save time, you run the Update a few times after updating your drivers with an automatic program. Then, finally, restart your computer and check for errors on the hard disc.
3. Why is the Windows 10 update failing to install?
There may be a conflict with another temporary or system file. Perhaps there isn’t enough storage space to download the updates. Check your activation status and, if necessary, repair Windows Activation.